Funko pops are the collectors favorite, they are created in the likeness of various real people or characters.They are popular because they are valued. Funko pop box are used for protection the funko pops,
If you are the funko box collectors, do you want to know how to seal it by a Funko pop box welding machine.
What do you need?
You need to have a funko pop box plastic welder with ultrasonic horn, funko pop box, funko, labels and also an air compressor;
How to weld funko pop box?
Before the welder shipment, we have already adjust all parameters on the welders, so you need to do below:
1. Connect the air pipe to the welder and the air compressor
2. Connect the welder power supply
3. Switch on the generator and choose the language to English
4. Put the labels and comic book into the card slabs and put them into the mold
5. Press two green buttons at the same time
6. Pull the box back
And then the whole process is finished,the whole funko pop box is within two seconds, the working efficiency is really high.
If you want to see the welding video, please click the Funko pop box welding process.
Why choose ultrasonic welder not glue?
The boxes used for grading are generally divided into two kinds of hand splicing and plastic injection molding, the difference is that plastic injection molding is an integrated box, so as long as the funko is put in and the lid is closed for welding; The splicing needs to be bonded with glue, the first disadvantage is that there will be an odor, the second is it is not environmentally friendly, and the third is that the bonding appearance will be affected by glue, and the fourth is that the bonding effect is not as strong as the welding and it can’t catch the water-tight effect; This is why more and more people choose to use ultrasonic welding machines to weld boxes.
Can plastic welder be used for sealing hand-spliced box?
Can we use a funko pop box plastic welder to weld a assembled funko pop box? Given that the hand-spliced box has so many problems, many guests will ask if it is possible to seal the spliced box with an ultrasonic welding machine. We have tried, the following is the result of our attempt, because the spliced box will not be like injection molding is a whole, there will still be gaps between the plate and the board, therefore, there will be a phenomenon of displacement during welding, resulting in the overall effect is not very good, if the design is reasonable, keep the weld seam small, you can try to use a high-power machine to complete the welding in a short period of time
We, Minyang Ultrasonic, have specialized in the development, design and production of ultrasonic plastic welder for more than 20 years, and we have exported hundreds of plastic welder out to more than 50 countries, we have different kinds of the plastic welder for funko pop box sealing, if you are interested in it, please kindly contact with us.
Post time: Jun-25-2022