Collecting sports cards is booming, some say for nostalgic reasons, but actually collecting sports cards is a fascinating thing in itself, you can get a unique card that no one else in the world has. Of course, collecting sports cards can also be used for investment.
If you are the sports card collector, do you know how to choose a suitable welder for PSA sports cards, we will introduce it in this article.
Why choose plastic welder for PSA sports cards sealing?
The traditional sealing methods are glues and screws, compared with glues and screws, ultrasonic welding process is environmentally-friendly, the welding appearance is beautiful and tidy, and the working efficiency is much higher, PSA sports cards welding process is finished within 1 second. There is also a fixed method: snap joint, snap joint is not strong, and it can’t reach the water-tight requirement. That’s why more and more people begin to use the PSA sports cards welder.
How to choose a suitable welder for PSA sports cards?
Welder Specs: There are many sizes of the PSA sports cards now, and the common size is 5.375″ Tall x 3.2″ Wide, for this common used one, 15khz 2600w PSA sports cards welder is the best.
Welder Type: It is better to choose the digital ultrasonic welder, because you can adjust the parameters on the digital generator. Besides, the digital generator is more stable with low after-sales rate and high satisfaction degree.
Good quality: For the sports cards, it is normal to have white mark, unsealed and damage problems, that’s why a good quality welder is needed.
For the white mark problem, the strong output power with adjustable amplitude of our plastic welder could make the plastic parts welded firmly before gelatinizing and turning white, thus effectively solve the problem of white mark problem
For the unsealed or unfirmed problem, our plastic welder has powerful output and instantaneous high power burst, the strong penetration can be transport to the welding surface, and it is especially suitable for products with air tightness and water tightness requirements
For the damage problem, during the welding process, what important is the the strong penetration provided by the stable output together with the strong amplitude rather than the hard reaction of cylinder when the amplitude is weak, our welder can solve the damage problem.
That is about how to choose a plastic welder for sports cards sealing. Actually we have exported hundreds of the plastic welder out to more than 50 countries, we have different kinds of the plastic welder for sports cards sealing, if you are interested in it, please kindly contact with us, we will recommend the most suitable one for you.
Post time: Apr-26-2022